The-Greatest-Mystery
Active Member
Sascha-Snowstorm and I are teaming up once again to offer a new type of commission, this time related to my silhouette designs! If you already own one of my silhouette designs, you can commission a pin with that. However, most people will have to buy a custom silhouette design for their pin.
Model Size: ~4-5 cm large on the longest side.
Source stl. And svg. files are available upon request, for personal use.
(International shipping included)
ADDITIONAL FDM PINS: $21 USD ea
(If ordered at the same time)
UPGRADE TO A RESIN PIN: $66.50 USD
(International shipping included)
ADDITIONAL RESIN PINS: $24.25 USD ea
(If ordered at the same time)
CUSTOM SILHOUETTE DESIGN: +$12 USD
2. A BLACK or WHITE base
Sascha's recommendation:
- Black for embossed, though dark metallics on white are also pretty nice.
- White for Inset.
3. The SECONDARY COLOUR (Any colour, or choice of metallics /colour-shift metallics)
Sascha's recommendation:
- Any light colour/metallic for embossed.
- Any dark colour for Inset.
- Extra colours for different parts are acceptable, within reason.
IE)
4. A STANDARD PIN CLASP or a PAIR OF NEODYMIUM MAGNETS.
IE)
- High-contrasting colours tend to look the best (a dark and a light colour)
- The darker colour looks better in the recesses
- - -
As always, my designs can be used commercially by individuals or independant/emerging companies. However, the model/prints are only for non-commercial use unless a prior agreement is reached with Sascha-Snowstorm (She's not on FA, so you can PM me instead).
- - -
To see more of Sascha-Snowstorm's work, check out her Art Station: https://www.artstation.com/saschauncia
She also has an Etsy: https://www.etsy.com/ca/shop/UnciaD.....g_id=891048784
Model Size: ~4-5 cm large on the longest side.
Source stl. And svg. files are available upon request, for personal use.
BASE PRICE - FDM PIN: $57.50 USD(International shipping included)
ADDITIONAL FDM PINS: $21 USD ea
(If ordered at the same time)
UPGRADE TO A RESIN PIN: $66.50 USD
(International shipping included)
ADDITIONAL RESIN PINS: $24.25 USD ea
(If ordered at the same time)
CUSTOM SILHOUETTE DESIGN: +$12 USD
CHOOSE BETWEEN:
1. An INSET (cut into the pin) or EMBOSSED (protruding from the pin) graphic2. A BLACK or WHITE base
Sascha's recommendation:
- Black for embossed, though dark metallics on white are also pretty nice.
- White for Inset.
3. The SECONDARY COLOUR (Any colour, or choice of metallics /colour-shift metallics)
Sascha's recommendation:
- Any light colour/metallic for embossed.
- Any dark colour for Inset.
- Extra colours for different parts are acceptable, within reason.
IE)
4. A STANDARD PIN CLASP or a PAIR OF NEODYMIUM MAGNETS.
IE)
GENERAL RECOMMENDATIONS:
- Metallic colours tend to look the best- High-contrasting colours tend to look the best (a dark and a light colour)
- The darker colour looks better in the recesses
- - -
As always, my designs can be used commercially by individuals or independant/emerging companies. However, the model/prints are only for non-commercial use unless a prior agreement is reached with Sascha-Snowstorm (She's not on FA, so you can PM me instead).
- - -
To see more of Sascha-Snowstorm's work, check out her Art Station: https://www.artstation.com/saschauncia
She also has an Etsy: https://www.etsy.com/ca/shop/UnciaD.....g_id=891048784
Last edited:
